USER MANUAL – Z-GPRS2 / Z-LOGGER
38
For the meaning of message content, see the TAG setup in the datalogger.
CAUTION!
-The SMS with the last log row can also be sent if file send on FTP failed (since the signal
required to send a log file is higher than the one needed to send an SMS), to analyse any FTP
server connection errors, enable the send error via SMS function.
-Since only 160 characters can be sent in an SMS, the log row may be truncated (especially when
logging Modbus registers). In this case, the software adds “...” to indicate the end of available
characters.
12.11.
Log save on microSD card
Logs can be saved on a microSD card formatted with the FAT16 or FAT32 filesystem (purchased
microSD cards are usually already formatted this way).
Log files are saved in the microSD folder/log in .csv text format.
Z-GPRS2/ Z-LOGGER will create a new file based on the set log send period. Minimum file save
time is 2 minutes.
If the microSD card is not inserted, Z-GPRS2 and Z-LOGGER manage a maximum of 11774 row log
queue (depending from the tag numbers). Logs in the queue will be saved when the microSD card
is inserted.
CAUTION!
-To avoid corrupting microSD card content, ONLY REMOVE THE microSD card when Z-GPRS2/ Z-
LOGGER IS OFF or unmount first the microSD with the command available on the configuration
software in the Test Configuration.
-NEVER EXTRACT THE microSD with Z-GPRS2 / Z-LOGGER POWER ON WITHOUT HAVING
UNMOUNTED THE MICROSD !
12.12.
Saving counters/totalizers
Counter/totalizer values are saved in the flash memory at least once every 24 hours from when
the device is turned on. Data is also saved every time it is turned off.
CAUTION!
Batteries are not delivered charged. Z-GPRS2 / Z-LOGGER must be charged for at least 48 hours
for backup batteries to be fully charged.
Summary of Contents for Z-GPRS2
Page 8: ...MANUALE UTENTE Z GPRS2 Z LOGGER 8...
Page 72: ...MANUALE UTENTE Z GPRS2 Z LOGGER 72...
Page 165: ...USER MANUAL Z GPRS2 Z LOGGER 73...
