USER MANUAL – Z-GPRS2 / Z-LOGGER
87
While to access the ftp server:
IP ADDRESS
PRIVATE PORT PUBLIC PORT
PROTOCOL
192.168.90.101 21
21
UDP/TCP
30.
FIRMWARE UPDATE
In order to include new functions, the system includes Z-GPRS2/Z-Logger firmware update options.
The last available firmware version is included with each Easy Z-GPRS2/Z-Logger/Easy Setup
software release.
2 different update modes are available for firmware:
Via USB
: This is the easiest method. A complete update takes about 5 minutes. Z-GPRS2 / Z-
Logger must be connected to a PC with Easy Z-GPRS2/Z-Logger/Easy Setup software installed.
Via microSD card
: This is the faster method. A complete update takes about 20 seconds. A
microSD adapter for PC (many mobile phones can also read/write microSD) and a microSD card
are required. This method is convenient when several devices are to be updated.
30.1.
Update via USB (using Easy Z-GPRS2/Z-Logger /
Easy Setup software)
Open the "Software Update" section to update firmware via USB. Follow the on-screen
instructions to successfully complete this operation.
CAUTION!
-BEFORE UPDATING firmware, note the current configuration.
-Once the firmware is updated, the previous setup may be deleted and thus Z-GPRS2 / Z-Logger
must be setup again.
-Keep in mind that a subsequent Easy Z-GPRS2/Z-Logger/ Easy Setup software version may not
be compatible with the setup file generated by a previous version.
30.2.
Update via microSD card (without using a PC)
Firmware can be updated via microSD card formatted with the FAT16 or FAT32 filesystem
(purchased microSD cards are usually already formatted this way).
Summary of Contents for Z-GPRS2
Page 8: ...MANUALE UTENTE Z GPRS2 Z LOGGER 8...
Page 72: ...MANUALE UTENTE Z GPRS2 Z LOGGER 72...
Page 165: ...USER MANUAL Z GPRS2 Z LOGGER 73...
