background image

ENGLISH -

5/8

t

The module has an internal UPS that allows it to remain turned ON even without external power
supply. To turn off the module, first of all, disconnect the external power supply and then press
the PS1 button on the right side of the module for at least 10 seconds. When the button is released
the PWR LED turns OFF in order to confirm that the module is switched off.

TECHNICAL SPECIFICATIONS

POWERSUPPLY

< 6.5W.

Voltage: 19 – 40 V

or 19 – 28 V

,Power absorbed:

C

A

50    60 Hz

DIGITAL INPUTS

Number of channels 4. PNP or NPN configurable.
Input voltage OFF<4V ON>8V (Max. 24V ).

C

Max. frequency 30Hz. Absorbed Current 3mA at 12V

10mA at 24V .

C

C

TOTALIZERS

Four 32 bit totalizers on non-volatile memory.

COUNTERS

Four 32 bit resettable counters on non-volatile memory.

DIGITAL OUTPUTS

Number of channels 2.

SPDT Relays with free contacts.

Max. Voltage 250V . Max. Current 2A.

A

ANALOG INPUTS

Number of channels 2. mA

or V

configurable.

C

C

Voltage input 0 – 30V. accuracy 0.1% of the Full Scale.
Current input 0 – 20mA. accuracy 0.1% of the Full Scale.
Inputs protection 40V / 25mA. Resolution 16 bit.

COMMUNICATION
PORTS

RS485 COM1 port on rear IDC10 connector, RS485 or RS232 COM2
port on M10-M11-M12 screw terminals, Ethernet 10/100 baseT with
autoswitch on RJ45 frontal socket and USB on MicroUSB side socket.

MODEM 4G

4G/LTE Model (Europe, Africa, Middle Est, Korea, Thailand, India)
Contact Seneca for other countries..
GSM / GPRS/ EDGE Dual-band: 1800 / 900 Mhz
UMTS / HSPA+, Tri-band: WCDMA 2100 / 850 / 900 Mhz
4G LTE Band 6- Band: 2100/1800/850/2600/900/800 MHz
Certifications: CE/GCF/Vodafone (Europe), KC/SKT/KT/LGU+ (Korea)
GNSS: GPS/GLONASS/BeiDou/Galileo/QZSS up to 55 chennels

SUPPORTED
SYSTEM PROTOCOLS

FTP client, SMTP client, http rest (SSL), MQTT (SSL),
ModBUS TCP server, ModBUS TCP client,
ModBUS RTU master        ModBUS RTU slave

and

.

For more information, please refer to the

User Manual.

GNSS

8 generation:

th

16GPS channels,
14 GLONASS channels,
Accuracy <1 5m CEP-50.

.

STORAGE UNIT

microSD and microSDHC Max. 32GB.

PROCESSOR

ARM 32bit

OPERATING SYSTEM

Real Time Multitasking

CHARACTERISTICS

Embedded Webserver and microSD Webserver

MODULE SHUT DOWN PROCEDURE

Summary of Contents for Z-LTE









Reviews: