MI00141 -E
2
USA
ENGLISH - 4/4
Output Connection
Input for In < 10 A
Input for In < 5 A
Applied Current
Input Connection
7
8
In
7
9
In
ELECTRICAL CONNECTIONS
We recommend using shielded cables for signal connections; the shield must be
connected to a
instrument
earth connection. We also recommend never positioning
these wires near power cables such as those for inverters, motors, or induction ovens,
etc.
Power Supply Connection
The power supply voltage must be in the range of 85
-
265 V
AC/VDC
.
The upper limits must not be exceeded as this can seriously damage the module
.
The power supply source must
include a fuse or suitable limiting device to
protect from any
failures in the module.
6
5
V
4
5
5
ext. supply
max 28 V
6
A
A
Voltage
External Power Supply
When connected to a
current tra
nsformer,
one of the two wires
must be grounded.
Power supply
1
3
85
-
265 V
DC/AC
50
-
400
Hz
Max 2 W
Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other
European countries with separate collection programs)
This symbol, found on your product or on its packaging, indicates that this product should not be treated as
household waste when you wish to dispose of it. Instead, it should be handed over to an applicable
collection point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences to the environment and
human health, which could otherwise be caused by inappropriate disposal of this product. The recycling of
materials will help to conserve natural resources. For more detailed information about the recycling of this
product, please contact your local city office, waste disposal service or thè retail store where you
purchased this product.
SENECA s.r.l.
Via Austria, 26 - 35127 - PADOVA - ITALY
Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287
e-mail: info@seneca.it - www.seneca.it
This document is property of SENECA srl. Duplication and reprodu
c
tion are forbidden, if not authorized. Contents of
the present documentation refers to products and technologies described in it. All technical data contained in the
document may be modified without prior notice
.
Content of this documentation is subject to periodical revision.
