and 104°F).
• Indoor use only. Do not use where directly exposed to water.
Installation Instructions
Note: If you plan to mount your Switch to a wall, Sengled recommends
ensuring you can add your Switch to your Sengled Hub before attaching it to
your wall.
1. Download the latest version of the Sengled Home App from the Apple App
Store or Google Play Store.
2. Register and sign in to your Sengled account using Sengled Home App.
3. Open the Sengled Home App, go to Devices, select the + sign, and choose
Smart Light Switch. Follow the instructions to finish installation.
Note: Please do not remove the “Remove to Pair” tab before you are
ready to pair your Switch to the hub as you will only have one minute to
successfully pair after removing the tab. If you are unable to pair, please follow
the reset instructions on the next page before attempting to pair again.
4. Ensure your Sengled Home app can discover the sensor.
Congratulations on successfully installing your Smart Lightstrip!
Reset Instructions:
To reset your Switch, please hold down the ON and OFF buttons at the
same time for at least 3 seconds. The indicator light will start flashing,
indicating a successful reset. Please try to connect it to your hub at this point;
you will have one minute from when it starts flashing to connect.
Operation
The following section outlines the operational modes of the Sengled Smart
Light Switch. These can be set via your Sengled Home app.
On
single click, double click, long press
turn on lights (user-defined)
