15
<Caution>
It is absolutely prohibited to replace battery at potential explosion
areas or dangerous regions. And the charger should be always used at the safe
place, since it is not an explosion-proof product.
When the unit is connected to battery charger, power source
should be turned off without fail before charging. The state of
charging is indicated on LED display of the charger..
**Red LED: charging / Green LED: completion of charging
Charging time of rechargeable battery is 5 hours, and it can be
used for 12 hours at the state of general measuring.
10. Applicable Battery and External Pump
Specification of the applicable rechargeable battery and disposable battery is as
below:
- Disposable Alkaline Battery: Energizer No. E91, Energizer No.EN91
- Rechargeable Ni-H Battery: GP BATTERY GP210AAHCB
It is not permitted to use other batteries for the instrument at dangerous regions.
<Caution>
1. It is absolutely prohibited to replace battery at potential explosion or dangerous
regions.
2. Replacement of components can be damage to intrinsic safety function.
3. The sensors published by SENKO should be used for replacement. Unsuitable
function could be shown if another sensors use for replacement.
4. Disassembly should be necessary only for sensors & battery replacement. After
the sensor replacement, the span gas calibration should be done.
<주의>
Followings may cause the danger of explosion; to use the old battery and
the new one together, to use different manufacturer’s battery; or to use the
batteries of different specification. In order to avoid an accident, please use only
the applicable batteries as specified above. Explosion can occur, when a battery is
thrown into fire or disassembled with force. Disposal of the used battery should
be performed according to the guide of the pertinent country or the work site.
