5.5.3.
DMX Change
1.
Enter the Menu - press and hold INTENSITY knob for a few
seconds
2.
Turn the INTENSITY knob
to the right until you find the
option DMX CHANGE
3.
Press the INTENSITY knob shortly
to enter the option
4.
The display will show WHITE DMX channel
5.
Turn the INTENSITY knob
to the right in order to choose the
channel on DMX control plate that you would like to change
daylight bulbs with.
6.
When you have find desirable channel, press INTENSITY
knob to confirm.
7.
Display will show YELLOW DMX channel
8.
Turn the INTENSITY knob
to the right in order to choose the
channel on DMX control plate that you would like to change
tungsten bulbs with.
9.
When you have find desirable channel, press INTENSITY
knob to confirm.
10.
Display will show CHANGING DMX ADDR.
11.
You have now set the channels on other DMX control plate.
5.5.4.
LED Type Panel
This option is only used for factory settings, and you SHOULD NOT CHANGE IT!
5.5.5.
Display backlight
1.
Enter the Menu - press and hold INTENSITY knob for a
few seconds
2.
Turn the INTENSITY knob
to the right until you find the
option DISPLAY BACKLIGHT
3.
Press the INTENSITY knob shortly
to enter the option.
4.
The display will show which channel is being used at the
moment.
5.
Turn the INTENSITY knob
to the right in order to change
the intensity of display backlight
6.
When you have find desirable strength, press INTENSITY
knob to confirm
7.
Display will show
8.
The display backlight intensity has been set.
