6.1.2.
Turn on the control plate
Insert the battery into battery adapter on the control plate. Press the battery bumper, insert the battery safety into
battery adapter and release the battery safety bumper.
Turn the control plate on using power button.
The display with show:
1.
Control plate is ON
2.
The bank of control plate
and the state of battery
3.
Set strength of each channel in
percentage
6.1.3.
Change the bank of control plate:
There are 6 banks available and each one has 4 channels. This way the control plate can control total of 24
channels.
In order to be able to control LED panel/s by control plate, the bank of the panel and the control plate must
be the same.
When you turn the control plate ON the display will show the bank number you are currently using and the
memory button (1-6) that blinks also shows the number of the bank.
To change the bank you are currently using please follow the steps:
