3.
Attaching the Remote Head
Any Remote Head can be mounted on One Minute Crane:
To mount a Remote Head
attach
the L holder
onto
the top of the crane arm.
L
holder
can be mounted in
two different ways,
depending on the way you
want to mount the remote
head or the camera.
To attach the remote head
use the enclosed 3/8˝
screw.
To attach the camera
directly to the crane use
the enclosed
¼˝
screw.
Both screws come
attached onto the front
side of the crane arm.
(See the picture on the left)
For the Remote Head
controller, there is a
head-
control-plate holder
enclosed to the set.
You can mount it by
pulling its handle through
the
extension 1 tripod
adapter
and fastening it
with the enclosed screw.
Put the weights onto the
weights-holding rod
to make
the counter balance. (Weights
are not included in the set!)
* Fine balance tunes can be
made with the enclosed
Velcro-
strip weight
.
