16
Adjusting settings via the operating menu
Entering a name – “Name”
Via the “
Name
” menu, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver. The name is displayed on the
standard display (see page 6). The name can consist of up to 8 characters
such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the audio output level – “AF Out”
Adjustment range: –30 dB to +12 dB, adjustable in 6-dB steps
Via the “
AF Out
” menu item, you can adjust the level of the audio output
Line
from the receiver to the input of the connected camera.
Activating/deactivating the automatic lock mode – “Auto Lock”
The lock mode prevents that the diversity receiver is accidentally switched
off or programed during operation. The lock mode icon
햶
on the
current standard display indicates that the lock mode is activated. For
information on how to use the lock mode, refer to page 10.
The extended menu “
Advanced Menu
”
To get into the extended menu “
Advanced Menu
”:
왘
From the main menu, select “
Advanced
”.
Setting the receiving frequencies for the frequency bank “U” –
“Tune”
왘
Press the rocker button to select a character.
왘
Press the
SET
button to change to the next segment/character
or to store the complete entry.
When you have selected one of the system banks and then select
the “
Tune
” menu, the diversity receiver automatically switches to
channel 1 of the frequency bank “
U
”. In this case, “
U.1
” briefly
appears on the display panel.
Upon delivery, the channels of the frequency bank “
U
” are not
assigned a receiving frequency.
Menu
L i c h a e l
Name
Name
Name
L
ichael
M
i
chael
“Stored”
Call up “Name”
Enter a character
and confirm
Enter a character;
store the setting
SET
Call up “
AF Out”
Select the desired
setting
0 d B
AF Out
0
dB
0
dB
AF Out
Menu
Store the setting
“Stored”
SET
SET
AF Out
+ 6
dB
A c t i v e
Auto Lock
Active
Auto Lock
I n a c t i v e
Auto Lock
Menu
“Stored”
SET
SET
Call up
“Auto Lock”
Select the desired
setting
Store the setting
