Using the EM 300-500 G4
69
Using the headphone output
You can use the headphone output on the front of the EM 300-500 G4
(6.3 mm jack) to listen to the audio signal.
ATTENTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
▷
Turn down the volume of the headphone output before you put on the
headphone.
▷
Increasing the volume of the audio output
AF Out
item”) to more than +18 dB also increases the volume of the headphone
output.
▷
Connect the headphone to the headphone socket.
▷
Control the volume by turning the volume control next to the head-
phone socket.
