Using the devices
18
SK 100 G3 bodypack transmitter, SKM 100 G3 radio microphone and
SKP 100 G3 plug-on transmitter
To switch your transmitter
on
(online operation):
SK 100 G3
SKM 100 G3
SKP 100 G3
#
Push the two catches
+
and open the battery
compartment cover
*
.
#
Briefly press the
ON
/
OFF
button
-
. The bodypack
transmitter transmits an
RF signal.
The red
ON
LED
$
lights
up and the standard
display “
Frequency/
Name
” appears on the
display panel. The trans-
mission icon
3
is
displayed.
#
Briefly press the
ON
/
OFF
button
,
.
The radio microphone
transmits an RF signal.
The red
ON
LED
)
lights
up and the standard
display “
Frequency/
Name
” appears on the
display panel. The trans-
mission icon
3
is
displayed.
#
Briefly press the
ON
/
OFF
button
(
.
The plug-on transmitter
transmits an RF signal.
The red
ON
LED
'
lights
up and the standard
display “
Frequency/
Name
” appears on the
display panel. The trans-
mission icon
3
is
displayed.
To switch your transmitter
off
:
#
If necessary, deactivate the lock mode (see page 20).
#
Press the
ON
/
OFF
button
-
until “
OFF
”
appears on the display
panel.
The display panel turns
off. The red
ON
LED
$
goes off.
#
Press the
ON
/
OFF
button
,
until “
OFF
”
appears on the display
panel.
The display panel turns
off. The red
ON
LED
)
goes off.
#
Press the
ON
/
OFF
button
(
until “
OFF
”
appears on the display
panel.
The display panel turns
off. The red
ON
LED
'
goes off.
P
'
3
(
-
$
'
+
+
3
)
+
*
,
*
3
You can switch your transmitter on and deactivate the RF signal on switch-on.
For more information, refer to page 19.
When in the operating menu, pressing the
ON
/
OFF
button will cancel your entry
(ESC function) and return you to the current standard display.
ew 100 P G3 Set _529660_0309_Sp9.book Seite 18 Mittwoch, 8. April 2009 6:57 18
