46
Indications and displays on the transmitter
Modulation display
The level display for audio signal “AF” shows the modulation of the
transmitter.
When the transmitter’s audio input level is excessively high, the level display
for audio signal “AF” shows full deflection.
When the transmitter is overmodulated frequently or for an extended period
of time, the text “PEAK” (backlit in red) flashes in alternation with the
standard display.
Button backlighting
During standby operation, the
ON
button
is backlit in red. When the
transmitter is switched on, the
SET
button
and the
/
button
are
additionally backlit in green.
Indications and displays on the receiver
Operation and battery status indication
The red LED (LOW BAT/ON)
provides information on the current operating
state of the receiver:
Red LED lit up:
The receiver is switched on and the capacity of the
batteries/accupack BA 2015 is sufficient.
Red LED flashing:
The batteries are/the accupack BA 2015 is going flat
(LOW BAT)!
In addition, the 4-step battery status display
on the display panel provides
information on the remaining battery/accupack BA 2015 capacity:
Modulation display of the receiving transmitter
The level display for audio signal “AF” shows the modulation of the
transmitter.
When the transmitter’s audio input level is excessively high (AF peak), the
receiver’s level display for audio signal “AF” shows full deflection.
3 segments:
capacity approx. 100 %
2 segments:
capacity approx. 70 %
1 segment:
capacity approx. 30 %
Battery icon flashing:
LOW BAT
Summary of Contents for EK 300 IEM
Page 1: ...Bedienungsanleitung W300 IEM ...
Page 41: ...Instructions for use W300 IEM ...
Page 81: ...Notice d emploi W300 IEM ...
Page 121: ...Bedienungsanleitung W300 IEM ...
