19
Adjusting settings via the operating menu
The extended menu “
Advanced Menu
”
Setting transmission frequencies and frequency banks – “Tune”
When you have selected one of the system banks and then select the
“
Tune
” menu, the bodypack transmitter automatically switches to
channel 1 of the frequency bank “
U1
”. In this case, “
U1.1
” briefly appears
on the display panel. Upon delivery, the channels of the frequency banks
“
U1
” to “
U6
” are not assigned a transmission frequency.
When you are in the “
Tune
” menu item, the RF signal is deactivated. Via
the “
Tune
” menu item, you can set a transmission frequency to be stored
in the current channel
or
you can select a different channel in one of the
frequency banks “
U1
” to “
U6
” and assign this channel a transmission
frequency. It is vital to observe the notes on frequency selection on
page 22.
Setting a transmission frequency for the current channel
왘
Set the desired frequency.
Selecting a channel and assigning this channel a frequency
왘
Set the desired frequency bank and the desired channel.
왘
Set the desired frequency.
왘
Press the rocker button until the “
Tune
” menu item appears.
왘
Press the
SET
button.
The frequency selection appears.
왘
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
왘
Press the rocker button until the “
Tune
” menu item appears.
왘
Press the
SET
button until the frequency bank selection
appears.
왘
Press the
SET
button.
The frequency selection appears.
SET
Select the MHz
value and confirm
Select the kHz
value; store the
setting
543
.200 MHz
Tu n e
544.
200
MHz
B.Ch: 20.1
B.Ch: 20.1
Tu n e
Call up
“Tune”
Advanced
Menu
Tune
“Stored”
SET
SET
SET
543.200 MHz
SET
SET
Select the
frequency bank
and confirm
Select the channel;
store the setting
Tu n e
B.Ch:
U1
. 1
B.Ch: U1.
1
Tu n e
Call up “Tune”
(special function)
Advanced
Menu
Tune
“Stored”
543.200 MHz
SET
SET
SET
SET
ew G3 SK 300_529670_0109_SP8_PRT.book Seite 19 Donnerstag, 5. Februar 2009 10:26 10
