background image

Manufacturer declarations

17 | 

HDVD 800

Manufacturer declarations

Warranty

Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this
product. For the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.

In compliance with the following requirements

RoHS Directive (2002/95/EC)

WEEE Directive (2002/96/EC)

Please dispose of this product at the end of its operational life-
time by taking it to your local collection point or recycling center
for such equipment.

CE Declaration of Conformity

EMC Directive (2004/108/EC)

Low Voltage Directive (2006/95/EC)

ErP Directive (2009/125/EC)

The declaration is available at www.sennheiser.com.

Statements regarding FCC and Industry Canada

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This class B digital apparatus complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.

Trademarks

Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG.

Other product and company names mentioned in this instruction manual
may be the trademarks or registered trademarks of their respective
holders.

                              

                SENNHEISER
                Model No: 

                                              FCC Declaration of Conformity (DoC)

We,                                                  

                                                        Sennheiser Electronic Corporation
                                                        One Enterprise Drive • Old Lyme • 
                                                        CT 06371 • USA
                                                        Tel: +1 (860) 434 9190, ext. 144
                                                        Fax: +1 (860) 434 1759

declare the above device comply with the requirements of Federal Communications Commission.

This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: 
1) This device may not cause harmful interference, and  
2) This device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: John Falcone

HDVD 800

Summary of Contents for HDVD 800




















Reviews: