5
Using the MZA 900 P as a cable tester
The MZA 900 P can also be used as a cable tester for XLR
microphone cables. For this, there is no need to connect a
microphone.
Connect one end of the cable to be tested to a mixing
console with activated phantom powering. Connect the
other end of the cable to the MZA 900 P.
LED lights up in green:
y
The cable is OK
LED lights up in red. Possible errors:
y
One signal wire is broken
y
One signal wire is short-circuited to the shielding
LED does not light up. Possible errors:
y
Both signal wires are broken
y
The shielding is interrupted
y
Both signal wires are short-circuited to the shielding
MZA 900 P_516535_0606_Sp6.book Seite 5 Mittwoch, 12. Juli 2006 3:19 15
