Monitoring and controlling a conference
78
y
The “Automatic Gain reduction” slider in the “Microphone” box
allows you to set the automatic gain reduction of the consoles’ micro-
phones.
y
The “Mute All” check box allows you to mute the conference consoles
of all audio groups.
y
The “Low”, “Middle”, and “Treble” sliders in the “Tone” boxes allow
you to adjust the bass, middle and treble response of the consoles’
built-in loudspeakers and microphones.
Note:
If you change the audio settings via the central unit’s operating menu,
this is automatically detected by the software and immediately
displayed in the “Audio Settings” dialog box.
Changing the conference mode during a conference
To change the conference mode during a conference:
왘
Make sure that no-one is currently speaking.
When changing the conference mode, all microphones are turned off
automatically!
왘
From the “Mode” menu, choose the desired conference mode.
The setting becomes effective immediately. The new conference mode
is displayed in the “Mode” box of the control palette.
Saving or printing the data of all inserted chip cards
To save the data of all inserted chip cards in a file (e.g. in order to
document the presence of the delegates), you require the SDC 8200 SYS
software:
왘
From the “Present Badges” menu, choose “Save”.
The file selection box opens.
왘
Select a folder, the file name and the extension “
mdb
” and confirm your
selection by clicking the “OK” button.
All inserted chip cards are read and the data are saved in a database file
in the order of the microphone numbers.
Example:
"C:\Programs\SDC8200\S_CM\Data\File.mbd","2004-
01-01","12:00:00",""
"Micro",
"Badge",
"Name",
"Party"
4,
1,
"Archer",
"USA"
5,
2,
"Becker",
"GER"
6,
3,
"Miller",
"CAN"
Summary of Contents for SDC 8200 SYS
Page 1: ...Software SDC 8200 SYS SDC 8200 SYS M Software Manual...
Page 115: ...Index 115...
