14
Muting the radiomicrophone
The radiomicrophone has a
MUTE
switch that noiselessly
mutes the audio signal without switching the
radiomicrophone off.
Turn the protective cap
at the bottom of the
radiomicrophone so that the
MUTE
switch
becomes
accessible.
.
Set the
MUTE
switch to the position ’MUTE’. The “MUTE”
display appears on the radiomicrophone’s display panel.
Provided that the pilot tone function is activated on
both the transmitter and the receiver, the “MUTE”
display also appears on the receiver display panel.
Set the
MUTE
switch back to the original position to
retransmit the audio signal.
Activating/deactivating the lock mode
The radiomicrophone has a lock mode that can be activated
or deactivated via the operating menu (see “Activating/
deactivating the lock mode” on page 23). The lock mode
prevents that the radiomicrophone is accidentally
programmed or switched off during operation.
