background image

3

Contents

The EM 550 G2 twin receiver  ............................................................................... 4

The channel bank system  .............................................................................................

4

Safety instructions  ................................................................................................. 5

Delivery includes ..................................................................................................... 5

Areas of application  ............................................................................................... 6

Overview of operating controls  ........................................................................... 7

Indications and displays ........................................................................................ 8

Indications and displays of the receivers ...................................................................

8

Remote displays of an ew 500 G2 transmitter .........................................................

8

Preparing the receiver for use  ............................................................................. 10

Mounting the receiver feet  ........................................................................................... 10
Connecting the antennas  .............................................................................................. 10
Connecting and mounting remote antennas ............................................................ 10
Daisy-chaining up to eight twin receivers  ................................................................. 11
Connecting the mains cable  ......................................................................................... 11
Connecting the amplifier/mixing console .................................................................. 12
Service interfaces  ........................................................................................................... 12
Mounting the twin receiver into a 19” rack  .............................................................. 12
Mounting the antennas ................................................................................................. 12

Using the twin receiver  ......................................................................................... 14

Switching the twin receiver on/off  ............................................................................. 14
Connecting the headphones/adjusting the volume ................................................ 14
Activating/deactivating the lock mode  ..................................................................... 14

The operating menu ............................................................................................... 15

The buttons  ..................................................................................................................... 15
Overview of menus ......................................................................................................... 15
Working with the operating menu  ............................................................................. 16
Operating menu of the receiver RX A or RX B of the twin receiver  ...................... 17

Adjustment tips for the operating menu .......................................................... 20

Switching between channel banks  ............................................................................. 20
Switching between the channels in a channel bank ............................................... 20
Selecting the frequencies to be stored in the channel bank “U” .......................... 20
Scanning the channel banks for free channels ......................................................... 21
Multi-channel operation ................................................................................................ 22
Adjusting the audio output level  ................................................................................ 22
Adjusting the squelch threshold  ................................................................................. 22
Doing the soundcheck  ................................................................................................... 23
Selecting the standard display  .................................................................................... 24
Entering a name .............................................................................................................. 24
Loading the factory-preset default settings ............................................................. 25
Activating/deactivating the pilot tone evaluation .................................................. 25
Activating/deactivating the lock mode  ..................................................................... 25
Using the equalizer  ........................................................................................................ 26
Adjusting the contrast of the graphic display .......................................................... 26
Exiting the operating menu .......................................................................................... 26

Troubleshooting ...................................................................................................... 27

Error checklist .................................................................................................................. 27
Recommendations and tips .......................................................................................... 28

Care and maintenance ........................................................................................... 28

Additional information .......................................................................................... 29

HDX 

noise reduction ....................................................................................................... 29

Wireless transmission systems  ................................................................................... 29
Squelch ............................................................................................................................. 30
Diversity reception  ......................................................................................................... 31

Specifications .......................................................................................................... 32

Connector assignment ................................................................................................... 33

Accessories .............................................................................................................. 33

Manufacturer declarations  ................................................................................... 34

Warranty regulations  .................................................................................................... 34
CE Declaration of Conformity  ....................................................................................... 34
Batteries or rechargeable batteries  ............................................................................ 34
WEEE Declaration ............................................................................................................ 34

Summary of Contents for SKP 500 G2 - 02-06




































Reviews: