Using the transmitter
16
When carrying out the
Sync
function, the transmitter’s current frequency bank and
channel setting as well as the receiver parameters adjusted via the “
Sync Settings
”
submenu (see page 27) are transferred to the EK 2000 IEM receiver via the infra-red
interface.
Carrying out an Easy Setup Sync or a Sync function
The following assumes that you are using the
Easy Setup Sync
function for setting up a multi-
channel system. You can also use the
Easy Setup Sync
function for establishing a
transmission link between one transmitter and one EK 2000 IEM receiver.
Easy Setup Sync
Sync
왘
Switch all transmitters and one receiver
on.
왘
Switch the transmitter and the receiver
on.
왘
On all transmitters, call up the “
Easy
Setup
” menu item.
The text “
Easy Setup Sync
” and the
icon appear on the display panels of the
transmitters.
The RF signal of the transmitters is
automatically deactivated.
왘
Press the
button
transmitter.
The
icon appears on the display
panel of the transmitter.
왘
Use your receiver to perform a frequency
preset scan (Scan New List).
왘
Select a channel within a frequency bank
with a sufficient number of unused
channels (Current List).
–
왘
Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface
왘
Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface
of your transmitter.
OFF
2
4
6
PHONES
OFF
2
4
6
PHONES
