background image

2

 Important safety instructions

Important safety instructions

Read this instruction manual.

Keep this instruction manual. Always include this instruction manual when passing the
device on to third parties.

Clean only with a dry cloth.

The configuration of the transmitter must only be carried out by professionally trained
personnel.

Refer all servicing to qualified service personnel. 
Servicing is required if the device has been damaged in any way, liquid has been spilled,
objects have fallen inside, the device has been exposed to rain or moisture, does not
operate properly or has been dropped.

WARNING: To reduce the risk of fire or electric shock, do not expose the device and the
mains unit to rain or moisture.

Do not place objects filled with liquids, such as vases or coffee cups, on the device.

Disconnect the mains connector from the wall socket 

– to completely disconnect the device from the mains, 

– during lightning storms or when unused for long periods of time.

Use only the supplied mains unit.

Ensure that the mains unit is:

– always readily operable and easily accessible,

– properly plugged into the wall socket,

– only operated within the permissible temperature range (see “Specifications” on

page 26).

– not covered or exposed to direct sunlight for longer periods of time in order to prevent

heat accumulation. 

Summary of Contents for Tourguide Wireless Transmitter SR 2020 D

































Reviews: