Instruction manual WD140SS
Instruction manual WD140SS
10
11
10
Instruction manual WD140SS
10
11
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual WD140SS
B E F O R E T H E F I R S T U S E
C L E A N I T A S F O L L OW S :
»
Clean the surface with a soft cloth and then dry it.
»
Pre-heat the empty drawer for at least two hours. Turn the temperature knob to the maximum
setting, in order to eliminate any residual grease, oil, or manufacturing resins which may cause
unpleasant odours during heating.
»
Air out the room.
»
Upon completion of this operation, the appliance is ready to be used for the
first time.
5
BEFORE THE FIRST USE
When using the appliance for the first time. Clean it as follows:
Clean the surface with a soft cloth and then dry it.
Pre-heat the empty drawer for at least two hours. Tum the temperature knob to the maximum
setting, in order to eliminate any residual grease, oil, or manufacturing resins which may cause
unpleasant odours during heating.
Air out the room.
Upon completion of this operation, the appliance is ready to be used for the first time.
APPLIANCE CONTROLS
The control elements are the temperature knob and the luminous ON-OFF switch.
With the switch pressed (position 1) the drawer is on, whereas when the switch is released
(position 0) the drawer is off. These parts can be seen only when the drawer is open.
When the drawer is closed, a control light located on the front of the appliance lets you see
whether the drawer is on.
OPERATION
-
Place the dishes in the drawer
-
Select a temperature
-
Turn on the appliance; the switch will light up
-
Close the drwer gently
-
Turn off the appliance before removing the heated dishes.
TEMPERATURE SELECTION
The temperature knob lets you select a temperature between approximately 30
℃
and 75
℃
.
Turn the temperature knob clockwise only, until it reaches it stop position (MAX).
Do not force it beyond the stop, otherwise the thermostat will be damaged.
The temperature scale does not show absolute temperatures in
℃
,but rather symbols that
represent the best temperature for respective groups of dishes, i.e cups - approx.40
℃
The control elements are the temperature knob and the luminous ON-OFF switch. With the switch
pressed (position 1) the drawer is on, whereas when the switch is released (position 0) the drawer
is off. These parts can be seen only when the drawer is open. When the drawer is closed, a control
light located on the front of the appliance lets you see whether the drawer is on.
»
Place the dishes in the drawer
»
Select a temperature
»
Turn on the appliance; the switch will light up
»
Close the drawer gently
»
Turn off the appliance before removing the heated dishes.
T E M P E R AT U R E S E L E C T I O N
The temperature knob lets you select a temperature between approximately 30ºC and 75ºC. Turn
the temperature knob clockwise only, until it reaches it’s stop position (MAX). Do not force it
beyond this point, otherwise the thermostat will be damaged.
The temperature scale does not show absolute temperatures in ºC,but rather symbols that
represent the best temperature for respective groups of dishes, i.e cups - approx.40ºC.
F O R C U P S O R G L A S S E S - A P P R OX 4 0 º C
When contained in glasses which are previously heated to this temperature, hot beverages do not
cool so rapidly and the container can nonetheless be touched without any problem.
P L AT E S / D I S H E S - A P P R OX . 6 0 º C
Foods placed in these dishes will stay warm longer. Depending on personal sensitivity, the dishes
can be touched without any danger. Use mitts or pot holders if necessary.
M A X A P P R OX . 7 5 º C
For dishes the thermostat is set to the maximum temperature.
The containers can be touched with appropriate mitts or pot holders.
H E AT I N G T I M E S
The time required to heat dishes, glasses and so on depends on several factors:
»
Material and thickness of the dishes
»
Amount of load
»
Arrangement of load
»
Temperature setting
For this reason it is not possible to provide absolute information.
It is advisable to determine the best settings for your needs based on practical experience.
A P P L I A N C E C O N T R O L S
O P E R AT I O N
