Instruction manual WD140SS
Instruction manual WD140SS
12
13
12
Instruction manual WD140SS
12
13
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual WD140SS
T R O U B L E S H O OT I N G
Repair of electrical appliances is to be carried only by qualified, authorised service agents.
Improperly or incorrectly performed repairs may create further hazards for the safety of the user.
Various factors affect heating time, for example:
Material and thickness of dishes, size of load, arrangement of load, temperature setting. Optimal
heating times for dishes are subjective. Therefore, it is advisable to determine them on a trial and
error basis according to your own preferences.
T R O U B L E S
S O L U T I O N
If the dishes are not warm enough
The appliance is on
The right temperature has been set
The heat outlets have been covered by large plates or bowls
The dishes have been heated for a sufficient period of time.
If the dishes do not get warm
There is fan noise: the fan is working, but the heating element might be
defective
If the fan is not working, it may be defective
The main switch of the electrical system is off.
The electrical power cord is unplugged or damaged
If the dishes overheat:
The temperature setting device may be defective
The on/off switch does not light up
when th appliance is switched on:
The control light of the switch is dfective
If the problem still persists, please contact Caple service for assistance:
T - 0117 938 7420
E - service@caple.co.uk
S A F E T Y I N S T R U C T I O N S F O R I N S TA L L AT I O N
Before connecting the appliance to the electrical mains, compare the connection data (voltage and
fraquency) indicated on the rating plate with the data of the electrical mains.
The data must match, otherwise the appliance may be damaged.
If in doubt, contact a qualified technician.
Make sure that the electrical outlet is easily accessible even after the appliance has been inserted.
The warming drawer can only be inserted with other appliances with a maximum weight of 40 kg
that are provided with adequate cooling ventilation.
For installation with combination appliances, follow the instruction and building in dimensions
shown in the ‘Installation dimensions’ section.
Insertion and installation of this appliance may be performed by qualified personnel who ensure
safe operating conditions.
I N S E RT I O N S PAC E M E A S U R E M E N T S
The dimensions of the housing are obtained from the size of the warmer drawer plus
measurements of the appliance combined with it.
I N S TA L L AT I O N
