Executing a flight
Note:
If there was any problem during the pre-flight checks per-
formed by the drone this will be indicated by a Pre-flight error in
eMo-
tion
as well as a by the status LED blinking red. See section ‘Pre-flight
errors’ on page 127 for a description of possible Pre-flight errors and
how to handle them.
swinglet CAM
Step 5: Connect to
eMotion
Start by connecting the USB ground modem to your computer. Then launch
eMo-
tion
, which will display the Connection window. Select the
swinglet CAM
connec-
tion profile, choose the corresponding FTDI port and click ‘OK’.
Note:
Every
swinglet CAM
is paired with the ground modem it is deliv-
ered with, and will only work with that particular modem. The name
of the FTDI port corresponding to the ground modem is labelled as
‘MaxStream PKG-U’ followed by the serial number of the modem.
When a connection is established
eMotion
will display a map and the Status Panel
31
Summary of Contents for swinglet
