Sensio Bella 13057, Instruction Manual

 8

Temperature Control Probe

1.  The temperature control probe is the nerve center and brain of the 

electric Griddle. Treat it carefully. Dropping or banging it could change 
its calibration and make the temperature settings inaccurate.

2.  Rotate the dial to select the temperature as called for in the recipe. 
3.  The indicator light on the temperature control probe will illuminate 

as soon as the dial is rotated. The light will go out once the selected 
temperature has been reached.

4.  Allow the Griddle to cool before removing the temperature 

control probe. 

5.  To clean the temperature control probe, simply wipe down with a soft, 

damp cloth. Make sure you dry it thoroughly before using again.

NOTE: The temperature control probe is not submersible.

CAUTION: Use the temperature control probe supplied with this 
Griddle only. The use of any other temperature control probe may cause 
fire, electric shock, or injury.

Before Using for the First Time

1.  Carefully unpack the Griddle and remove all packaging materials. 
2.  Place the non-stick Griddle on a clean, flat working surface.
 

NOTE: Some countertop and table surfaces, such as Corian® and other 
surfaces, are not designed to withstand the prolonged heat generated 
by this Griddle. We recommend placing a hot pad or trivet under the 
Griddle beforehand to avoid possible damage to the surface. Be sure the 
sides and back of the Griddle are at least 4 inches away from any walls, 
cabinets, or objects on the counter or table. 

3.  Before first use, see Hints For Care and Use of Non-Stick Surface 

and Care & Cleaning Instructions sections of this Instruction Manual.

4.  Before cooking in the Griddle for the first time, wash the non-stick 

Griddle in mild dishwashing soap, wipe and allow to dry. 

NOTE: The Griddle (without the temperature control probe) 
is dishwasher safe.

5.  Insert drip tray into rails under the Griddle’s side, positioned directly 

under the grease drain. 

6.  Reach under the Griddle to extend the grill tilt lever. (See Figure 1.) The 

left side of the Griddle will be tilted towards the grease drain. This will 
allow grease to drain from the food into the drip tray. 

7.  Turn the temperature control knob on probe to OFF position and attach 

securely in place.

8.  Coat the non-stick surface with vegetable shortening before heating. If 

necessary, remove excess oil with paper towel.