Installation
operation
Maintenance & Care
once fixed the sE9080HD light
is activated on the opening
of the cabinet door. the Ir
sensor detects that the door
is no longer in its path and
activates the light.
HD LED In-CabInEt LIgHt
wItH IR SEnSoR
• Ensure that the power is disconnected prior to cleaning.
• to keep the finish of this product, wipe over with soft cloth periodically.
• Do not use harsh chemical solvents, it may dis-colour or damage the finish.
7
Finally wire the lED driver to 240V mains supply
or 13a plug top.
5
re-attach the light unit to the bracket once
fixed.
taking the bracket, mark-up
the positions for the screw
holes in the cabinet.
3
secure the bracket with
2 screws tightly to the inside
of the cabinet.
4
unclip the bracket from the back of the
light fitting.
2
Unit 7 Speedwell Road, Whitwood, Castleford, West Yorkshire, WF10 5PY
www.sensio.co.uk
technical drawings for illustration purposes only, sensio has the right to change any information
without prior notice. Make sure you check all hole cut outs before work commences.
2
6
Plug the white connector into the 24V lED
driver distributor block. Beware not to exceed
the wattage of the lED driver, the max wattage
will be displayed on the 24V lED driver and on
the light unit fitting it will display the wattage
requirement.
Drill hole in bottom of cabinet and feed
cable through.
1
