2
›
english
The I-Tec Mini Series is a range of miniature non-contact infrared temperature sensors
with separate electronics modules.
All models have an adjustable emissivity setting and are capable of measuring a wide
variety of target materials, including food, paper, textiles, plastics, leather, tobacco,
pharmaceuticals, chemicals, ruMBer, coal and asphalt.
The optional touch screen interface provides temperature indication, alarms, sensor
configuration and data logging to MicroSD Card. The optional high-temperature
sensing head may be used in ambient temperatures of up to 180°C without cooling.
The low-noise cable on high ambient temperature models is resistant to interference
from movement, so it is ideal for mounting on moving objects such as robot arms.
A choice of optics are available to measure small or large targets at short or long
distances, and there is a choice of 4-20 mA, RS485 Modbus and alarm relay outputs.
SPECIFICATION
GENERAL
Temperature Range
See table of Model Numbers
Maximum Temperature Span (-IT models)
1020°C
Minimum Temperature Span (-IT models)
100°C
Output
4 to 20 mA or RS485 Modbus
Field of View
See table of Model Numbers
Accuracy
± 1°C or 1%, whichever is greater
Repeatability
± 0.5°C or 0.5%, whichever is greater
Emissivity Setting Range
0.20 to 1.00
Emissivity Setting Method
-I models: via two rotary switches in electronics
module
-MB and -BT models: via RS485
-IT and -BT models: via touch screen
Response Time, t
90
240 ms (90% response)
Spectral Range
8 to 14 μm
Supply Voltage
24 V DC ± 5%
Maximum Current Draw
100 mA
Maximum Loop Impedance
-I and -IT models: 900 Ω (4 to 20 mA output)
Alarm Relays (-IT models)
2 x Single Pole Changeover alarm relays rated
24 V DC, 1 A, isolated 500 V DC
MECHANICAL
Sensing head
Electronics Module
Construction
Stainless Steel 316
Die-cast Aluminium
Major Dimensions
Ø18 x 45 mm
98(w) x 64(h) x 36(d) mm
Mounting
M16 x 1 mm thread
Two M4 screws for wall mounting (see
diagram)
Cable Length (sensing head to electronics module) 1 m (standard), up to 30 m (optional)
Weight with 1 m Cable
390 g (approx)
Cable Connections
Removable screw terminal blocks (see
Connections). Conductor size: 28 AWG to
18 AWG
Output Cable Gland
Suitable for cable diameters 3.0 to 6.5 mm
Summary of Contents for I-Tec Mini Series
Page 37: ...37 fran ais...
