12
•
Pressing and releasing the
C
key cancels the present operation when in
M
enu
mode.
•
Pressing and releasing the
C
key when an image is frozen or being viewed
from memory, will return to real-time measurement status.
•
When a parameter is selected, such as a measurement cursor, pressing the
C
key will delete the highlighted measurement.
•
Press and hold the Key for > 3 seconds to auto focus
[4]
Freeze/Save key (Marked “S”)
Used for freezing or saving thermal image. Short press the key once to
freeze the image , Press C to return to real-time measurement. Short press
the key twice to save the image . In file management, press the key to choose
whether delete the chosen image or video.
[5]
Select/Auto key (Marked “A”)
The “A” or attribute button performs 3 functions.
a)
The first function is modification of selected parameters. It is obtained
by a quick press and release (less than 2 seconds), with this functions to
modify their parameters. Subsequent presses will “scroll” through the
available parameters. The selected function will be highlighted in
yellow.
b)
The second function is calibration. Press and hold the Key for > 3
seconds for auto calibration to get accurate temperature measurement
result.
c)
The third function is blue tooth. Open blue tooth, select the image, short
press to send the image.
[6] F1
Trigger/Shortcut key
