19
the camera, it will display <XXX
°
or >XXX° with XXX being the min or
max temperature of the selected range.
•
To modify the measurements attributes, select the measurement
parameter, and then press the
Confirm
key. The screen will display
the settings dialog box. The below figures are spot, line and area
measurement respectively.
Spot attributes dialog box
Spot attributes can amend emissivity, distance and reference
temperature.
When
Set Ref
is set as
Yes
, the displayed values of other
measurements will be their delta from this measurement.
Line attributes dialog box
Line attributes can amend emissivity, distance, highest temperature,
lowest temperature, average temperature, max temperature
difference, the cross point temperature and reference temperature.
Press A key for up and down switch. When
Set Ref
is set as
Yes
, the
displayed values of other measurements will be their delta from this
