Page 10
Sentinal DTS Quick Start Guide SEN2-QSG1.0
THE TRACE SELECTION FIELD
The Trace Selection Field allows the user to select the channel, the way in which
the distributed trace data is displayed and the units of measure for the axes. The
user can select to display, distributed temperature, raw data or points data.
THE SPATIAL AVERAGING ADJUSTMENT CONTROL
The Spatial Averaging Adjustment Control allows the user to set the amount of
spatial averaging applied to the distributed temperature trace data. Apply spatial
averaging to remove unwanted noise but at the expense of degrading spatial
resolution.
THE DATA RECORDING INFORMATION FIELD
The Data Recording Information Field displays information regarding the distributed
temperature sensing data determined by the configuration file including start and
stop times, the current repetition and the measurement status.
THE PROGRAM CONTROL FIELD
The Program Control Field allows the user to view and control the execution status
of the program.
NOTE:
For more information on using the Sensornet software, please refer to the User
Guide.
