background image

 

Screenshots & Mini-Reports 

 

 

49 

If you have more than four screenshots saved, you can view the others by either swiping on the 
screen (right and left), or using the 4 way directional arrows.  To select a particular screenshot, 
touch the screen directly, or use the 4 way directional arrows.  From here you have the option 
to: 

 

Email

 

– Pressing this will allow you to email the screenshot as a mini-report, provided 

you’re connected to a Wi-Fi network and have a sending email address saved on the 
system.  You will see the same email prompts as shown in 

Section

 7.1. 

 

Expand 

– This will enlarge the selected screenshot to full screen (Figure 7-4) 

 

Figure 7-4: Screenshot Gallery 

– Expanded View 

 

Press 

Tile View

 to return to the view showing four per page. 

 

Delete 

– This will delete the selected screenshot.  A confirmation message will appear 

asking if you want to proceed with this.

 

 

Delete All 

– 

This will delete ALL screenshots.  A confirmation message will appear 

asking if you want to proceed with this.

 

 

Exit 

– 

this will return you to the main screen.  The next time you enter Screenshot 

Gallery it will show the same view that you left with, Tiled or Expanded. 

7.3  Using the Hotspot on your Smartphone 

If a Wi-Fi signal in unavailable, you may be able to use your Smartphone as a Wi-Fi access 
point, by creating a Personal Hotspot.  If you are experiencing difficulty connecting to a cell 
phone Personal Hotspot, ensure that the phone is in discovery mode while connecting.  On 
iPhone (iOS 9.0), for example, this involves going to 

Settings - Personal Hotspot 

(Figure 7-5).  

Ensure that the Personal Hotspot setting is turned on, and wait on this screen until the LMX100 
connection has been established.  Once you have received confirmation on the Display Unit, the 
cell phone can resume normal use.   

Summary of Contents for LMX100


































































































Reviews: