Final testing and adjustment
3 - 4 • • • MPS-4100 product guide
Increasing the microwave sensitivity increases the probability
of nuisance alarms. The MPS-4100 Microwave system is
designed as a penetration detector, not as a volumetric
detector. The sensitivity should be increased only as required,
to better detect objects in accordance with specific detection
criteria.
5. Consult the project specifications for additional detection tests and perform
as required.
Silver Network Test
Refer to the product documentation for the alarm display and control system to
test MPS-4100 units that communicate over the Silver Network.
StarNeT 1000 Test
Refer to the
Control Program Maintenance Guide, J4DA0402
and the
Control
Program Operator’s Guide, J4DA0302
for StarNeT 1000 test information.
MX-5000 Series test
Refer to the MX-5000 Series manual for detailed test procedures.
Figure 3-1 Sensitivity Pot adjustment
MIN
MAX
mid-range
RV1
