INSTALLATION AND OPERATION INSTRUCTIONS — PERSONAL ALARM SYSTEM
50
7.3
Repair
7.3.1
Perform system repairs using good commercial practice. It is recommended
that repairs be performed by personnel who have received factory training in the PAS-
120 system. Improper repairs or system damage caused by untrained personnel can
affect warranty.
7.3.2
Isolate defective components by swapping field connections with known
good components or by using spare components reserved for maintenance actions.
For example, a suspected defective 03RM can be isolated by swapping its wiring with
an adjacent 03RM at the PARC-3. If the problem moves to the other zone, the problem
is the 03RM or the wiring. If the problem stays with the bad zone, the problem is
probably in the zone PARC-3.
7.3.3
Return components thought to be defective to
Senstar
for repair in
accordance with the return procedure. Include information describing the nature of
the problem with the component to be repaired. This will shorten the factory repair
time required.
