3–6
Sensus Metering Systems
Chapter 3: Find Route Information
the first address. This function is available from any point
along the route.
To go to the first address on a route...
1
on page 2-2 for instructions on
opening a route.
2
Press the F3 key.
Search Route... Menu
The system displays the Search Route... menu.
3
Use the PgUp/PgDn key to select Go To Beginning.
4
Press the ENTER key.
The system displays the first location on the route.
Â
Go to the Last Address
By default, the AR5000 displays the first address when you
open a route. You can use the TAB key to page through every
Note
The first and last route address are
interchangeable, depending on how you have
the AR5000 configured. You can set the
system to traverse forward, starting at one end
of the route (ex.: address#1 through
address#10). Or, you can set the system to
traverse in reverse, starting at the opposite
end of the route (ex.:address#10 through
address#1). For more on this configuration
setting, see Alter Route Behaviors on
Note
F3 is the default key assignment for the Search
menu. Key assignments can be changed. For
more information, see About the Key
Controls/Functions.
