Sensus AR5000 User’s Guide
3-3
Search the Route
Search the Route
Routes are primarily an organized list of individual locations
and their associated meter IDs. The locations are listed in a
logical order to match the path that you could take as you
physically move from one location to the next. Typically, you
start at one end of the route and move through the list,
entering readings until you reach the end of the route.
However, there are times you may need to locate a specific
address or meter on the route. This could happen if you take
the route out of order or need to verify an address, reading,
or specific text associated with a specific address.
The AR5000 has a set of features that you can use to search
for addresses, meter IDs, and specific displayed text.
Find instruction for these tasks in this section:
•
on page 3-4 - How to display a
specific address on a route.
•
on page 3-5 - How to display the
first address on a route.
•
on page 3-6 - How to display the
last address on a route.
•
on page 3-8 - How to display the
location information for a specific meter ID.
Note
Some addresses may have multiple meters
(ex.: apartment buildings or industrial sites).
Typically, each meter is listed at a separate
location on a route.
Note
Once you find an address, you can perform
any of the functions described in Chapter 2:
