EN
Instructions for use for the user
p. 21/28
5.2.
+HDWLQJIRUWKH¿UVWWLPH
CAUTION!
)RUPDWLRQRIVPRNHDQGRGRXUVZKHQKHDWLQJXSIRUWKH¿UVWWLPH
Materials used during the manufacturing process will be present on the
new heating elements. These evaporate when the sauna heater is heat-
HGXSIRUWKH¿UVWWLPH7KLVSURGXFHVVPRNHDQGDQXQSOHDVDQWRGRXU
Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when
RSHUDWLQJWKHVDXQDKHDWHUIRUWKH¿UVW
time
and if the
heating elements for the sauna heater have been replaced
.
This prevents damage to health due to the fumes and smoke produced when
KHDWLQJIRUWKH¿UVWWLPH
1. Select the highest possible temperature on the sauna control unit.
2. Heat up the sauna heater for half an hour.
Do NOT remain in the sauna cabin during this period.
3.
$OORZWKHVDXQDFDELQWRYHQWLODWHWKRURXJKO\DIWHUKHDWLQJIRUWKH¿UVWWLPH
4. If no smoke or odours form the next time the sauna heater is heated, you
can start to use the sauna.
If smoke or odour is produced again, leave the sauna cabin immediately
and repeat the initial heating up process followed by ventilation.