The REALTOR® Lockbox
The REALTOR® Lockbox Owner’s Guide
Owner’s Guide •
28
and a renewal code to temporarily renew your SentriCard from any
lockbox. To obtain a renewal code, contact your Association,
SentriLock Support or use the
Card Authorization Renewal System
(CARS)
. For more information, see "How to Renew Your SentriCard®"
on page 62.
Lock the Keypad
- You should lock the keypad before you store your
lockboxes. This will prevent activating the keypad and possibly running
down the battery. You can insert a SentriCard® into the lockbox to
unlock the keypad.
FUNC - 6 + 7 + ENT
Borrow Lockbox
- If you are the lockbox owner's team member or if
your office uses Broker Sharing, you can use
FUNC + 6+ 2 + ENT
to
borrow a lockbox. When you borrow a lockbox, the lockbox adopts
your codes and settings from the
Agent Default Lockbox Settings
window. If the lockbox owner checked the
Loan Lockbox on FUNC 2
check box on the
Agent Default Lockbox Settings window
, you can
use
FUNC + 2
to assign the lockbox to your listing and borrow a
lockbox. If your Association uses
NXT
series lockboxes or with
firmware version 22.22 or greater, you can borrow a lockbox. For more
information, see "How to Borrow a Lockbox" on page 42. To find out
what series and firmware version your Association uses, see "How to
Determine Your Lockbox Series and Firmware version" on page 20.
FUNC + 6+ 2 + ENT
After you use any of the keypad commands, the lockbox may display a combination of lights. Some of the
lights may be blinking or steady. The following table lists the meaning of the lights on the lockbox's display.
Lights
Description
CARD
(steady)
Reading / writing information to the SentriCard®. Do not remove your
SentriCard® while the lockbox displays the
CARD
light.
CARD + ERROR
(blinking)
The lockbox cannot read and/or write to the SentriCard®. Try re-
inserting your SentriCard®. If the error persists, contact SentriLock
Support.
CARD + ERROR
(steady)
PIN expired. You Need to renew your SentriCard®.
CODE + ERROR
(alternating)
You entered an incorrect PIN or code. Re-enter your PIN or code. If
you entered
FUNC + 1 + ENT
to release the shackle and the lockbox
displays alternating
CODE + ERROR
lights, you do not have ownership