8
English
Bolt Down Instructions
Drill the holes in the wall using the appropriate diameter and depth for the type of
hardware and the mounting surface being used. Be sure to drill from the bottom and top
back of the safe.
Place the wall spacer between the Home Defense Center and
the wall. The wall spacers will cover the newly created holes.
There are two separate areas where the safe needs to be bolted. Be sure to bolt down the safe at
the bottom and the top.
Install the screws and washers as required, mounting washer,
screw and bolting washer to go through the holes of the unit.
WARNING
Sentry
®
Safe is not responsible for costs incurred if the unit is to be replaced.
WARNING
Bolting/unbolting the unit is at a consumer’s expense and discretion.
Cont. … Bolting down your safe
3
4
5
9
