As per 06/2016
8
3. Technical data
See the Datasheet of the fan in question!
4. Connection and commissioning
Connect mechanical parts
Check the product for transport damage. Do not install defective
products.
Install the product in accordance with the application.
Employ ESD protective equipment when mounting and ensure that the
power has been turned off.
Connect electrical parts
Electrical parts may only be connected by a qualified electrician and after the mechanical
installation!
Always comply with the electrical installation regulations.
Observe the connection regulations that are valid in your country
(e.g. fuses, circuit breaker)
Electrical voltage, electric shock
The product is a built-in part and has no switch for disconnecting
power.
Only connect the product to current circuits that can be switched off by
a switch with all poles disconnected.
When working on the product, ensure that the system/machine in
which the product is installed, is disconnected from the mains and
cannot be switched on again.
NOTICE
DANGER
!
CAUTION
!
