As per 06/2016
9
Electromagnetic compatibility (EMC) may affect system integration of the
product due to interaction. Ensure the electromagnetic compatibility of the
complete system.
Voltage control (if existing)
Speed control via the supply voltage is only permitted within the stipulated supply voltage
range. A speed control via PWM of the supply voltage is not permitted.
Requirements
Ensure that the voltage supply corresponds with the voltage of the product before putting
the product into operation.
Check that the data on the nameplate corresponds with the pin connection data.
Only use cables that are designed for the current stipulated on the nameplate and for the
corresponding ambient conditions. Ensure that the electrical connection has adequate
mechanical protection.
Check connections
Cut off the power at all phases and ensure that it cannot be switched on again.
Check that the connector contacts are correctly connected to the connection cable and
the panel-mounted connectors are correctly connected to one another.
DC fans
≤
120VAC are products of Protection Class III!
GmbH
NOTICE
NOTICE
