5.3. CONFIGURE AS NTRIP CLIENT
5.3 Configure as NTRIP client
1. Make sure you have a cellular connection as described in the previous section.
2. Select the
Corrections/NTRIP
tab on the Altus NR2’s Web Interface.
Figure 5-5:
NTRIP tab of the Web Interface
3. Select ’Client’ in the Mode drop down box.
4. Enter the Caster server name or IP address and the Port of your CORS.
5. Enter the User Name and Password of your account.
The NTRIP password will
automatically be encrypted and not shown for security.
6. Once the NTRIP Mode, Caster, and Port are entered, the Mount Point drop-down box
will be populated.
Figure 5-6:
NTRIP Settings
7. Select a Mount Point in the drop down box.
8. Click OK
9. The Altus NR2 will automatically initialize and connect.
27
