22
22
Ellipse2 Micro from SBG Systems
22
3.2
Power Consumption
The Ellipse2 IMU consumes 400mW.
3.3
Connector
The IMU connector is a 10 ways Harwin Gecko. The exact receptacle reference is G125-
FS11005L0P. The mating connector is Harwin G125-3041096L4 (plus contacts).
The input voltage range (VIN pin) is from 4 to 15V. Communication with the AsteRx-i3 S
OEM module is through Port A.
3.4
Open-Ended Cable
Septentrio’s
CBL_AxiS_OEM_IMU cable (part# 215684) can be used to connect the SBG IMU
to the AsteRx-i3 S OEM. Twisted pairs are used when applicable to prevent cross-talk
between digital signals. The wiring diagram and the wire colors are indicated below.