4.1. HOW TO CONFIGURE THE ASTERX-U FOR RTK
Step 2: Configure the Rover receiver
Enable RTK positioning mode on the rover receiver
Ensure that RTK is enabled as a positioning mode. This can be done in the GNSS Position tab
by checking the ‘RTK’ box in the ‘Position Mode’ field as shown in Figure 4-11.
Figure 4-11:
Ensure that RTK is enabled as a positioning mode
Configure the Ethernet connection of the rover receiver
On the
IP Ports
window of the rover receiver, click on
New IP Receive Connection
as
shown in Figure 4-12 to start configuration sequence. The
Port
and
TCPAddress
should
match the port and IP address of the Base station receiver.
Figure 4-12:
In the
IP Ports
window, click on
New IP Receive Connection
to
configure the connection with the base station
40
Summary of Contents for AsteRx-U
Page 1: ...AsteRx U User Manual ...