Receiving a phone call
When an incoming phone call is received, your radio sounds an audible alert
and displays the identity of the caller (if the contact or number is stored in
your phone book).
1. Press the
Accept
context key or the
Select/Send
key to answer the call.
Press the
Reject
context key or the
Cancel/Home
key to reject the call.
2. To end the call, press the
Clear
context key or the
Cancel/Home
key.
Note:
Your radio can be customised to answer calls automatically after a
set time period, exactly as if the
Accept
context key or the
Select/Send
key
had been pressed. If the time period is set to zero the call may be
answered before any alerts are audible.
Note:
If two consoles are attached to an SRG3900 mobile radio only one of
the consoles can be customised to answer a call automatically.
Answering phone calls in half-duplex mode
You can answer an incoming full-duplex (phone) call as a half-duplex call.
This is useful, for example, where a full-duplex call could pick up too much
background noise for clear communications.
1. Press the
PTT
button to answer the call in half-duplex mode.
2. Continue as for Group calls and individual half-duplex calls:
To speak press and hold the
PTT
button and speak into the
microphone.
To listen release the
PTT
button and listen to audio received through
the speaker.
3. To end the call, press the
Clear
context key or the
Cancel/Home
key.
Broadcast calls
Sometimes it may be necessary for your Dispatcher to make a high-priority
broadcast (also known as a Site Wide Call) to all network users. These calls
take priority over any lower priority on-going calls, and you cannot respond
to them: pressing the PTT key has no effect during a broadcast call.
During a broadcast call the display changes to ‘Broadcast Call’ and the
Broadcast Call
icon is displayed.
User Guide
47
Summary of Contents for SCC
Page 1: ...User Guide SCC colour console ...
Page 6: ...vi SCC 03 2016 ...
