DMR Mobile Radio
8
Accessory information
Sepura supply a range of accessories for this product. Contact your
Service Provider or visit our website for a full list of accessories:
http://www.sepura.com/products/terminals/accessories/dmr-
accessories.aspx
Fist microphone
Your mobile is equipped with a standard fist microphone designed for
close-talk mobile communications.
Attach the microphone heavy-duty connector to the Microphone/
programming cable interface connector on the mobile.
When using the microphone, always hold the microphone firmly in
your hand with the microphone facing towards you and in an upright
position. Hold the microphone approximately 5 cm (2 in.) away from
your mouth when speaking.
To talk, press the PTT grip switch during the call hang time period
(when the LED is solid orange) and talk clearly into the microphone.
Release the grip switch when you have finished talking.
Never hold or swing the microphone by the heavy-duty coiled lead.
Note that your mobile can also be used with an optional keypad fist
microphone (part no. 300-01064). This microphone supports the one
touch button feature that lets you make a group or private call to a
predefined alias or ID by pressing one of the predefined numerical
keys (1 to 9). It can also be used to manually dial a contact.
Always secure your microphone using the mounting clip when not in
use.
Basic operation
Power On/Off
To power
on
, press and hold the Power button.
To power
off
the radio, press and hold the Power button.
Adjusting the volume
Rotate the Volume control knob clockwise to increase the volume.
Rotate the Volume control knob counter-clockwise to decrease the
volume.
Selecting a Channel
Your Service Provider may program the mobile channels before use.
Each channel can be configured as either an analogue or digital
channel. Note that some functions, such as messages, are not available
on analogue channels.
Press the up/down navigational keys to select a channel.
Making a PTT call
Your mobile may already be programmed with contacts (people and
groups) by your Service Provider. Each group may be allocated to a
different channel. The contact person or group can be programmed as a
private call, group call or All Call.
Call to the default contact group or person
A contact person or group may be added as a default contact.
The default contact is called when you press the PTT button.
You may need to select the channel before making the call.
In the Home display, press the PTT button to initiate a call.
