6
3.
“
Suspended Particle
”
in mg/L
—
the AOBS composite concentration,
How Super-Turbidity Measurement Works
on page 21.
For clarity, we recommend that after setting up a project on WQDataLIVE,
you change the parameter names from their defaults. To do this:
1.
On your WQDataLIVE p
roject’s dashboard, pull down the Admin
menu and select Settings.
2.
On the Settings page, find the Parameter Settings section.
3.
Under Parameter Settings, click on the name of the logger
location, then on the name of the logger.
4.
Now you should see a list of all the parameters measured by the
logger, including the LISST-AOBS parameters. You can edit the
names as you see fit.
We recommend “ABS Concentration”,
“Turbidity” and “Total Concentration”.
