background image

25

INTENDED USE / SAFETY INSTRUCTIONS

APPLICATION CONDITIONS AND INTENDED USE

INTENDED USE

The Electric Brush

c

utter is intended for cutting grass using a rotating 

trimmer  line 

(or  a  cutter  blade)

  driven  by electric motor. 

SAFETY INSTRUCTIONS

1.

Use the Brush

c

utter for its intended purpose only.

2.

Make sure that the Brush

c

utter is fully and correctly assembled

before  you  start  working.  Check  that  all  elements  of  the  tool  are

correctly mounted and securely fastened.

3.

Make  sure  that  frequency  and  voltage  of  the  mains  march  with

those shown on the body of the electric Brush

c

utter.

4.

Use only double insulated extension cords with waterproof sockets

when  working  with  the  Electric  Brush

c

utter.  Do  not  use  extension

cords and sockets that are damaged or are not rated for the connected

load. Immediately turn off and unplug the Brush

c

utter if the extension

cord becomes damaged during operation.

5.

Carefully inspect the area to be trimmed before starting the work,

and remove glass splinters, stones, remnants of steel reinforcement or

other foreign objects.

6.

The Cutter is not intended for use by children or people with motor

impairments, as well as by people under the influence of alcohol, drugs

or medications.

7.

Wear  ear  protectors,  goggles  or  a  face  shield.  It  is  forbidden  to

work barefoot or in open toe shoes.

8.

Do not immerse the Brush

c

utter in water or any other liquid as

this can damage the motor and may result in electric shock.

9.

Use trimmer line with a diameter of not more than 2.4 mm. It is

forbidden  to  use  reinforced  line,  steel ropes  or wires instead of  the

trimmer line.

10.

Always  unplug  the  Brush

c

utter  from  the  mains  when  leaving  it

unattended, after use, and before cleaning or relocation.

11.

Regularly inspect the Electric Brush

c

utter for faults and damages.

If any damages are detected, stop using the Brush

c

utter immediately

and send the tool to the nearest service centre.

12.

Any repair or maintenance of the Electric Brush

c

utter other than

cleaning shall be carried out in an authorized service centre.

Автотовары

 «130»

130.com.ua

Summary of Contents for SEB1200D










































Reviews: