Systèmes de dosage – construction verticale
CVD 1 (s) / CVD 2
Notice d’utilisation
TA450-11 / fr/en / 01.2017 / PM
www.sera-web.com
Sous réserve de modifications techniques !
Subject to technical modifications!
45
7.2.8 CVD2 – option
splash guard (Pos. 500)
A splash guard is available as option to protect the operating
personnel against chemical splashes which may occur due to
damage on the system. The splash guard consists of three
parts. The side parts are fixed, the front part is removable.
Fig.27 Option splash guard
7.2.9 CVD2 – option
leakage sensor (Pos. 700 / 710)
A magnetic float switch (pos. 700) or a leakage sensor (pos.
710) detects leakages at the system. This optional device can
be integrated in the collecting basin.
Fig.28 Option leakage sensor
CAUTION !
The magnetic float switch (Pos. 700) is not approved
according to WHG!
7.2.10 CVD2 - option
stand for floor mounting
The system is installed on a mounting plate for wall mounting
as standard. A stand for floor mounting is available as option if
there are no possibilities for wall mounting at the installation
site.
Fig.29 Option stand for floor mounting
700
710
