MOVING THE GATE MANUALLY IN THE EVENT
OF A POWER FAILURE
- Open the rear section after releasing by means of the
safety key supplied. - Fig. 25 -.
- Release the motor by using the internal key secured to
the terminal board cover - Fig 26 -; manual movement of
the gate is now possible - Fig. 27 -.
- To restore the locked status (in any position) simply rota-
te the internal key in the opposite direction.
ADJUSTMENT OF INTERNAL MECHANICAL STOPS
- Open the rear section after releasing by means of the sa-
fety key supplied. - Fig. 21-
- Loosen the internal screw by means of a Phillips screw-
driver. 22. Raise the top casing by tilting it by a couple of
degrees, then pull out horizontally. - Fig. 24 -
- Using a 13 mm wrench, set the two front (closing) mecha-
nical stops and rear (opening) stops in the required posi-
tion. - Fig. 23 -
MOTOR FORCE ADJUSTMENT
Adjustment of motor force for the version MT/B4 at 230V~ is by variation of the power supply voltage, for example
using the control unit SERAI CR/41, and by variation of the current control on the version MT/C4 at 24Vdc, for
example using the control unit SERAI CR/39.
In any event, installation must be in full observance with current standards governing power-operated gates;
remember that
the installer is responsible for the system and operation in compliance with
standards.
Fig. 26
Fig. 25
Fig. 27
Fig. 21
Fig. 22
Fig. 24
!
WARNING: if inclined
excessively, the
connector tooth may
break.
1
2
Fig. 23
MOTOR TECHNICAL SPECIFICATIONS
M
T
/B
4
-C
4
I
E
0
2
0
6
0
8
0
5
2
9
-
A
4
V
f/
r
-
IS
M
T
B
4
-I
S
-E
MT/B4
MT/C4
Max. leaf length
Max. leaf weight
Power supply
Absorption
Power
Angular speed
Opening time
4,00
300 Kg
230 V~ ± 10% 24Vdc ±25%
50/60Hz
1,5A
1,5A
110W
110W
0,084 rad/s
20s
Max. thrust
Max. torque on leaf
Force adjustment
Protection rating
Temperature
Dimensions
Weight
- without brackets -
1600N
1600N
200Nm
200Nm
variation of power current
supply voltage
control
IP55
-20°C ÷ +60°C
850 x 130 x 135 mm
9,5 Kg
8,5Kg
MT/B4
MT/C4
E L E T T R O N I C A P A D O V A
I
S
IN
C
E
1
9
6
5
M A D E I N I T A L Y
VIA ENRICO FERMI, 22
35020 LEGNARO - PADOVA
I T A L I A
PHONE +39 049 79 08 58
FAX +39 049 88 30 529
E-MAIL export@serai.com
WEB www.serai.com
TERMS OF GUARANTEE
The company reserves the right to make modifications to the equipment without prior notice thereof. SERAI products are covered by a standard guarantee with a term of 24 months.
Coverage starts on the date on which the tax document constituting proof of purchase is issued and guarantee services shall be provided on the company's premises at Legnaro - PD -
or at the Authorised Service Centres. Carriage costs shall be borne by the Customer.
CE CONFORMITY DECLARATION
SERAI spa declares that the product MT/B4, MT/C4 has been desifned and manufactured according to the above mentioned directives and standards
WEEE DIRECTIVE 2002/96/EC
This appliance was manufactured after 13/08/2005. To protect the environment: when the equipment is no longer needed, take it to a special WEEE (Waste Electric and
Electronic Equipment) collection centre. Do not dispose of it with normal household waste.
