9. Attach foam wiper pad to wiper seal head frame stop plate.
Position back of wiper seal head frame on the
ground and secure from tipping over. Mark a reference line on the front of the stop plate that extends between
the top corners of head frame. Mount top of foam wiper even with this reference line.
NOTE:
Clamp a temporary 1” to 2” spacer (by others) between back of foam wiper and front of top plate. This
provides the foam wiper with a forward bias after attachment.
Screw through galvanized steel strip (located inside pocket in top flap) and stop plate on 12” centers with self-
drilling TEK screws (provided). A portion of the top flap of the foam wiper will extend above the top of the stop
plate. Fold this fabric over the top of edge of the stop plate and cap with the plastic trim provided.
